AS 61347.2.13:2018 PDF

AS 61347.2.13:2018 PDF

Adopts IEC 61347-2-13:2016 with national modifications to provide particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. To be read in conjunction with AS/NZS 61347.1:2016.

AS/NZS IEC 61347.2.13:2013 will also remain current for six months after the date of publication of this Standard and after this time it will be superseded by AS 61347.2.13:2018. Regulatory authorities that reference this Standard in regulation may apply these requirements at a different time. Users of this Standard should consult with these authorities to confirm their requirements.

After consultation with stakeholders, Standards Australia and Standards New Zealand decided to develop this Standard as an Australian Standard rather than an Australian/New Zealand Standard.

The objective of this Standard is to specify particular minimum safety requirements for d.c. or a.c. supplied electronic controlgear associated with LED modules.

This Standard is an adoption with national modifications and has been reproduced from IEC 61347-2-13:2014+AMD1:2016 (ED 2.1), Lamp controlgear, Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules, and has been varied as indicated to take account of Australian conditions. The modifications are specified in Appendix ZZ.

This Standard is to be read in conjunction with AS/NZS 61347.1:2016, Lamp controlgear, Part 1: General and safety requirements (IEC 61347-1:2015, MOD).