IEEE C62.92.4-2014 PDF

IEEE C62.92.4-2014 PDF

This part of the guide is concerned with the neutral grounding of single- and three-phase ac electric-utility primary distribution systems with nominal voltages in the range of 2.4 kV – 34.5 kV. For the purpose of this guide, the term “distribution” includes the substation providing power to distribution feeders, the distribution feeders, and the distribution transformers providing service at utilization voltages. The scope of this guide does not include the grounding of the low-voltage secondary systems supplied by distribution transformers or consumer-owned facilities that are covered by other documents such as the National Electrical Code(R) (NEC(R)) (NFPA 70, 2011 Edition)
The purpose of this guide is to provide information regarding neutral grounding of electric-utility primary distribution systems with nominal voltages in the range of 2.4 kV – 34.5 kV. Classes of distribution systems grounding are defined while basic consideration is given to economics, control of temporary overvoltages (TOVs), control of ground fault currents, and ground relaying.
Revision Standard – Active. The neutral grounding of single- and three-phase ac electric-utility primary distribution systems with nominal voltages in the range of 2.4 kV – 34.5 kV is addressed. Classes of distribution-systems grounding are defined. Basic considerations in distribution-system grounding concerning economics, control of temporary overvoltages, control of ground-fault currents, and ground relaying are addressed. Also considered is the use of grounding transformers, grounding of high-voltage neutral of wye-delta distribution transformers, and interconnection of primary and secondary neutrals of distribution transformers.